Pipe hangers &
supports
Eaton’s B-Line Business
509 West Monroe Street
Highland, Illinois 62249-0326
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
SINCE
1924
Manufacturers Standardization Societyof the
Valve and Fitting Industry, Inc.
B-Line is a leading manufacturer and fabricator of metal products used in the support of pipe and equipment
for industrial, residential, commercial, utility, and OEM installations. B-Line is proud of the exacting standards
of research, design, engineering, and manufacturing that go into each and every product that comprise our
pipe hanger product line. Our customers have access to the most complete support systems offered in the
industry, including pipe hangers, metal framing, cable tray, slotted angle, seismic bracing, fasteners, telecom,
enclosures and anchors.
Many of B-Line's products are listed by Underwriters' Laboratories, Inc. and FM Global approved for fire
sprinkler system installations. All B-Line products are manufactured to meet or exceed industry standards set
for their design and manufacture.
B-Line products are produced in five modern plants consisting of over 1,000,000 square feet. These facilities
are located in Highland, Illinois; Troy, Illinois; Reno, Nevada; Corona, California and Sherman, Texas.
Regional sales and distribution centers are located throughout the United States stocking standard B-Line
products for quick service and delivery.
This catalog is designed to be helpful to engineers and contractors in the application and selection of pipe
hangers, supports and seismic bracing for construction and maintenance.
If a unique application requires a special product not included in this catalog, B-Line engineering personnel
are ready to furnish design consultation and realistic material estimates. In addition, sales representatives with
engineering expertise are located throughout the United States and abroad for your convenience.
WARNING
All hanger products in this catalog are intended for installation and service as illustrated or described. Do not
use them for any purposes other than those described in this catalog. Products that are used for unintended
purposes could fail, resulting in severe personal injury or death.
Examples of misapplications which could cause severe personal injury or death include, but are not limited to:
• Using a beam clamp on a beam other than those described in the catalog;
• Using concrete inserts as anchors for pulling pipe up to the required elevation;
• Suspending clevis hangers, one under another, which could result in an accumulative load that is
greater than that which the pipe hanger will support.
B-Line pipe hanger and support products are manufactured in accordance with industry standards. Our
customers should exercise care to use these products properly so as to avoid potential accidents. Contact
B-Line for assistance with proper installation and use of the products in this catalog.
NOTICE
Cooper B-Line reserves the right to change the specifications, materials, equipment, prices or the
availability of products at any time without prior notice. While every effort has been made to assure the
accuracy of information contained in this catalog at the time of publication, Cooper B-Line is not
responsible for inaccuracies resulting from undetected errors or omissions.
Upper Attachments
Ceiling Flange ...214
Angle Supports ...215-218Swivel Attachment ...219
Bolted & Welded ...220-222Concrete Plates ...223-225Rod Beam Attachments ...226
Threaded AccessoriesEye Sockets & Nuts ...228-229U-Bolts ...230-232Miscellaneous Accessories ...233-235Rods, Couplings, Washers & Hardware...236-247Vibra Trol™Pads ...251-253Molded Mounts ...253
Cup Mounts ...254
Spring Mounts ...255-260Vibration & Spring Hangers ...261-268VibraClamp™...269-270Isolation Products ...271
DURA-BLOK™Base ...274
Base & Channel ...275-277Base & Clamp Riser ...278
Base & Harness ...279-280Base & Rollers ...281-282Base Stand ...282
Load Distribution Plate ...283
KwikWire™Clamps ...286Wire Rope ...286KwikPak™Kits ...287Cable Cutter ...287KwikWire Hangers ...288Accessories (Loop, Hook, Bracket Termination) ...289-293Reference DataMetric Conversions ...295
Miscellaneous ChartsPiping, Tubing, Threaded Rod, etc. ...296-306Trapeze Hanger Chart ...307-308MSS & Federal Specifications toB-Line Cross References ...309-310B-Line Compliances & Approvals ...311-312Cross ReferencesCooper B-Line to TOLCO ...313-314TOLCO to Cooper B-Line ...315
Anvil/Grinnell to Cooper B-Line/TOLCO...316
Erico to Cooper B-Line/TOLCO...317
PHD to Cooper B-Line/TOLCO...318
Super Strut to Cooper B-Line/TOLCO...319
C & P* to Cooper B-Line/TOLCO...320
Empire to Cooper B-Line/TOLCO...321
Index ... 322-324* C & P is Carpenter & PatersonApplications & Pictorial Index ...3-16Strut Systems Information ...17-18Technical DataMaterials & Corrosion ...19
Finishes & General Information ...19-20Recommended Specifications ...21-26Beam ClampsC-Clamps ...28-34Bottom Beam Clamps ...35-43Top Beam Clamps ...44
Trus Joist & Angle Iron Beam Clamps ...45-46Pipe HangersClevis Hangers ...48-58‘J’ Hangers ...54
Band Hangers ...59-62Split Clamps & Hangers, Rings ...63-66, 71Wall Mount Lay-In Hangers ...66
Wire Hangers ...67-69Spring Hangers ...70Pipe ClampsRisers ...74-75Underground Clamps ...76-77Clamps ...78-88Straps ...89-92CPVC Hangers ...93-102Plastic KWIK-CLIP™ ...103-104Pipe Rollers & Roller SupportsRoller Hangers ...106-107Roller Supports ...108-116Roller Stands ...117-119Spring Cushion Roller Hanger ...120
Rollers ...121-122Pipe Supports, Guides, Shields & SaddlesCalcium Silicate Shields ...124
Stands & Supports ...125-139Isolators, Guides & Anchors ...140-146Slides, Shields, Saddles ...147-166TOLCO™Seismic BracingSway Bracing Pipe Clamps ...168-172Sway Bracing Attachments ...173-183Mechanical Fast Clamps ...184
Pre-Stretched Aircraft Cable ...185
Cable Sway Brace Attachments ...186-187Sway Brace Main Pipe Attachments ...188-190Concrete InsertsConcrete Deck Inserts ...192-193Spot Inserts & Insert Nuts ...194-199Continuous Concrete Inserts ...200-202Anchor Clips ...203BracketsLight Duty ...206-208Medium Duty ...209Heavy Duty ...210Brackets w/ U-Bolts ...211
Pictorial Index
(7)Beam Clamps
Pictorial IndexFig. 130Trus JoistBeam ClampPage 46B3042T
Bar Joist HangerPage 45
B3042
Top Beam ClampPage 44
B3045
Side Beam ClampPage 44
B3050
Beam ClampPage 40
B3291 thru B3298
UFS Forged SteelBeam ClampPage 43B3054Malleable Iron Beam ClampPage 42B3040
Adjustable Beam ClampPage 40B312Retaining StrapPage 39Fig. 69RRetrofitRetaining StrapPage 38Fig. 69Retaining StrapPage 37B3055
Steel Beam ClampPage 41B303-B309Beam ClampPage 36B321 SeriesBeam ClampPage 36Fig. 67SS(3/4” Throat)Fig. 68SS(11/4” Throat)ReversibleStainless SteelC-ClampWith LocknutPage 35Fig. 65XT-3/8ReversibleSteel C-ClampWith Locknut3/4” ThroatPage 33Fig. 65ReversibleSteel C-ClampWith Locknut3/4” ThroatPage 33Fig. 66ReversibleSteel C-ClampWith Locknut11/4” ThroatPage 34B3033Wide Jaw Top Flange C-ClampPage 30B3034Top Flange C-ClampPage 31Fig. 68S(3/4” Throat)Fig. 68W(11/4” Throat)Malleable,Reversible BeamClampsPage 32B351LSteel C-ClampWith LocknutPage 28B3036LMalleable Iron C-ClampWith LocknutPage 28B3362 thru B3365Retaining StrapPage 29B3031-3/8Light DutyMalleable C-ClampPage 30B3037
Z-Purlin Beam ClampPage 29
Pipe Hangers
B3170CTC
Copper TubingPlastic CoatedAdjustable Swivel Ring
Page 60
B3170CT
Copper TubingAdjustable Swivel Ring
Page 60
u
u
Fig. 2F
Felt LinedAdjustable Band Hanger
Page 59
Fig. 2
Adjustable Band HangerPage 59Pictorial IndexFig. 1CBS
Clevis Pipe SpacerPage 48B3104Light Duty Clevis HangerPage 57B3104CPlastic CoatedLight Duty Clevis HangerPage 57B3104FFelt LinedLight Duty Clevis HangerPage 57
X
B3104CTCPlastic CoatedCopper TubingLight Duty Clevis
HangerPage 58
B3104CT
Copper TubingLight Duty Clevis
HangerPage 58
u
u
B3106Vee BottomClevis HangerPage 56B3106VPlastic PipeSupport ChannelPage 56
u
DURA-COPPER™FinishB3109
Flat Top ClevisHangerPage 55B3690Adjustable 'J'HangerPage 54B3690CPlastic CoatedAdjustable 'J' HangerPage 54B3690FFelt LinedAdjustable 'J' HangerPage 54B3108Extended Clevis HangerPage 52B3102AWWAClevis HangerPage 51B3100StandardClevis HangerPages 49 & 50B3100CPlastic CoatedStandardClevis HangerPage 53B3100FFelt LinedStandardClevis HangerPage 53
X
Pipe Hangers
(Continued)
Pictorial IndexBH-2-4BH-5-8BH-9-12
Parallel Strap HangerPage 71
BH-2-4-RBH-5-8-RBH-9-12-R
Right Angle Strap HangerPage 71BL1400 thruBL1490HangerPage 71B3262Light DutySpring HangerPage 70Fig. 120‘U’ HangerPage 68Fig. 120MJ
Mutt & Jeff‘U’ HangerPage 69
Fig. 120RWA
Retrofit Wrap Around“u Hanger Clamp
Page 67Fig. 120WWrap Around‘U’ HangerPage 69B3191Straight 'J' HookPage 66B3190Offset 'J' HookPage 66B3175
Ring and Bolt HangerPage 65
B3175CT
Copper TubingRing and Bolt Hanger
Page 65
u
B3198H
Hinged ExtensionSplit Pipe Clamp
Page 63
B3198HCT
Copper TubingHinged Extension
Split Pipe ClampPage 64
u
B3198R
ExtensionSplit Pipe Clamp
Page 63
B3198RCT
Copper TubingExtensionSplit Pipe Clamp
Page 64
u
Fig. 200 HHeavy DutyBand HangerPage 62Fig. 200Trimline AdjustableBand HangerPage 61Fig. 200FFelt LinedTrimline AdjustableBand HangerPage 61Fig. 200CPlastic CoatedTrimline AdjustableBand HangerPage 61
u
DURA-COPPER™Finish
Pipe Clamps
Pictorial IndexB3148
Offset Pipe ClampPage 87
B3149
Marine HangerPage 88
Fig. 4B
Pipe Clamp ForSway Bracing
Page 86
B3144
Double Bolt Pipe ClampPages 83 & 84
B3146
Heavy Duty Double Bolt Pipe Clamp
Page 85
B3140
Standard Pipe ClampPages 79-80
B3141
A.W.W.A. Pipe ClampPage 81
B3142
Heavy Duty Pipe ClampPage 82
Fig. 4A
Pipe Clamp forSway BracingPage 78B3140FFelt LinedStandard PipeClampPages 79-80B3140CPlastic CoatedStandard Pipe Clamp
Pages 79-80B3132Two-BoltUnderground ClampPage 76B3132WLug WasherPage 76B3134WWasherPage 77B3134Four-BoltUnderground ClampPage 77B3373CPlastic CoatedStandard Riser Clamp
Page 74
B3373F
Felt LinedStandard Riser Clamp
Page 74
B3373
Standard Riser ClampPage 74B3373CTCopper TubingRiser ClampPage 75B3373CTCCopper TubingPlastic CoatedRiser ClampPage 75
u
u
B3180FLFlush MountPipe StrapPage 89
Pipe Clamps
(Continued)
Pipe Rollers & Roller Supports
Pictorial IndexB3110Adjustable SteelYoke Pipe Roll
Page 106
B3114
Pipe Roll With SocketsPage 107
B3122
Adjustable Roller SupportPage 108B3122AAdjustable DoubleRoller GuidePage 109
X
X
Available in DURA-GREEN™FinishBPRC SeriesRod MountKWIK-CLIPPage 103BPIC SeriesBPSC SeriesChannel MountKWIK-CLIPPage 104Fig. 28M
Offset Hanger &Restrainer forCPVC & IPS Pipe
Page 100
Fig. 29
Double OffsetHanger & Restrainer
for CPVC PipePage 101
B3184
Light DutyOffset Hanger &
Restrainer forCPVC & IPS Pipe
Page 102Fig. 22Single FastenerCPVC StrapPage 93Fig. 23Double FastenerCPVC StrapPage 95Fig. 24Double FastenerSide MountedCPVC StrapPage 96Fig. 25Surge RestrainerPage 97Fig. 27Speed NutPage 98Fig. 28
Stand-Off Hanger &Restrainer forCPVC PipePage 99B3180Extended LegPipe StrapPage 90B2400
Standard Pipe StrapPages 91-92
Fig. 22L2
One Hole Hanger/RestraintFor CPVC & Steel Pipe
Pipe Rollers & Roller Supports
(Continued)
Pipe Supports, Guides, Shields & Saddles
Pictorial IndexB3092
Adjustable Pipe SaddleSupport With Yoke
Pages 133 & 134B3093Adjustable PipeSaddle SupportPages 135 & 136B3097Pipe SaddleWith StrapPage 137B3098Adjustable PipeSupport w/U-BoltPage 138B3094Flange SupportPage 139B3095
Pipe Saddle SupportPages 131 & 132B3089Pipe SupportAdjusterPage 128B3090Pipe SaddleSupportWith U-BoltPages 129 & 130B3088Base StandB3088S
Seismic Base StandPages 125 & 126
B3088T
Threaded Base Stand
B3088STSeismic ThreadedBase StandPages 125 & 126B3096Adjustable PipeSaddle SupportPage 127B3380thru B3384360° CalciumSilicate ShieldPage 124B3119SL
Roller With SteelBase Plate
Page 119
B3114R
Long Pipe Roll OnlyPage 121
B3264
Spring Cushion HangerPage 120
B3117R
Short Pipe Roll OnlyPage 122
B3118SL
Adjustable Roller StandWith Base Plate
Page 118B379Pipe RollersPage 115B479Pipe RollersPage 116B3117SL
Steel Roller StandPage 117B218Pipe RollersPage 113B219Pipe RollersPage 114B3124Roller SupportPage 111B3126Roller SupportPage 112B3120Roller ChairPage 110
Pipe Supports, Guides, Shields & Saddles
(Continued)
TOLCO
™
Seismic Bracing
Pictorial IndexFig. 800Adjustable SwayBrace AttachmentTo SteelPage 173Fig. 825
Bar Joist SwayBrace AttachmentPage 174Fig. 828Universal SwayBrace AttachmentPage 176Fig. 825A
Bar Joist SwayBrace Attachment
Fig. 906
Sway Brace Multi-Fastener AdaptorPage 177Fig. 9074-WayLongitudinal SwayBrace AttachmentFig. 909No-Thread SwivelSway BraceAttachmentPage 179Fig. 4A
Pipe Clamp ForSway Bracing
Page 168
Fig. 4B
Pipe Clamp ForSway Bracing
Page 169
Fig. 4L
Longitudinal “In-Line” Sway Brace
AttachmentPage 170
Fig. 4LA
Longitudinal “In-Line” Sway Brace
AttachmentPages 171 & 172B3151Insulation Protection ShieldPage 162B3891 thru B3897Pipe SlidesPages 147 - 150B3153Insulation ProtectionShield With Tabs
Page 162B3155Short InsulationProtection ShieldWith TabsPage 163BPH SeriesSnap N’ShieldClevisPage 164BPS SeriesSnap N’ShieldPages 165 & 166B3160 thru B3165Pipe CoveringProtection SaddlePages 155 - 160B3991 thru B3993Pipe SlidesPages 151 - 154B3154Short Insulation Protection ShieldPage 163B3195I.P.S. IsolatorB3195CTCopper TubingIsolatorPage 140B3147AB3147BAnchor ChairsPages 143 & 144B3256Hold-DownAnchor ClampPage 145B3257Base PlatePage 146B2417Pipe GuidesPage 143B3281 thruB3287Pipe AlignmentGuidePages141 & 142
TOLCO
™
Seismic Bracing
(Continued)
Concrete Inserts
Pictorial IndexB2500
Light Duty Spot InsertPage 196
N2500
Steel Insert NutPage 196Fig. 109AFSpot InsertPage 194 &194aB3014Malleable IronSpot InsertPage 197B3014N
Malleable Iron Insert NutPage 197
B3019
Adjustable MetalDeck Ceiling Bolt
Page 193
Fig. 109A
Concrete Deck Insert
Page 192 & 192a Heavy Duty Spot InsertB2499
Page 195B2505 thruB2508Spot InsertFig. 980Universal SwivelSway BraceAttachmentPage 182Fig. 981Fast-AttachUniversal Swivel Sway
Brace AttachmentPage 183Fig. 985Mechanical FastClampPage 184Fig. 986Mechanical FastClampPage 184Fig. 990Cable SwayBrace AttachmentPage 186Fig. 991Fast AttachCable Sway Brace
AttachmentPage 187Fig. 1000Fast ClampSway BraceAttachmentPage 188Fig. 1001Sway BraceAttachmentPage 189Fig. 2002Sway BraceAttachmentPage 190Fig. 910
Swivel Sway BraceAttachmentPage 180Fig. 975Straight SwayBrace FittingPage 181Fig. BRC CABLEPre-StretchedAircraft CablePage 185
Concrete Inserts
(Continued)
Upper Attachments
BRACKETS
Pictorial IndexB3061Angle BracketPage 217Fig. 78
All Steel Ceiling PlatePage 214
Fig. 51
Side Beam Angle ClipPage 216
Fig. 50
Side Beam Bracket ForNFPA Rod & Fastener Sizing
Page 217
B3060
Side Beam Angle ClipPage 216
B3070
Reversible Angle ClipPage 215B3060LSide BeamAngle ClipPage 215B3199Ceiling FlangePage 214B3199CTDura-Copper CoatedCeiling FlangePage 214
u
u
DURA-COPPER™FinishB3064
Adjustable Strut BracketPage 207
B3068
Light Duty WeldedBracketPage 206
B3067
Heavy Duty Welded BracketPage 210
B3066
Medium Duty WeldedBracketPage 209
B3065
Light Duty WeldedBracketPage 208
B3069W
Welded Knee BracePage 211B3069E“O” BracketPage 211BE-5-8BE-9-12Fastener ClipPage 203B2503
Heavy Duty Spot InsertPage 199
B22I, B32I, B52I
Continuous Concrete InsertsPages 200 - 202
BD40
Fastener ClipPage 203
Upper Attachments
(Continued)
Threaded Accessories
Pictorial IndexB501
Light Weight U-BoltPage 230B3188Standard U-BoltPages 231 & 232B3188CPlastic CoatedStandard U-BoltPages 231 & 232B3222Eye SocketPage 228B3201
Forged Steel ClevisPage 233
B3200
Weldless Eye NutPage 229
B3223
Offset Eye SocketPage 234B3203Extension PiecePage 234B3202TurnbucklePage 235B3224Hanger AdjusterB3224CTDura-Copper CoatedHanger AdjusterPage 235
u
B3058
Side Beam ConnectorPage 220Fig. 56Tapped SideBeam ConnectorPage 217Fig. 58Threaded SideBeam BracketPage 218Fig. 75Swivel AttachmentPage 219B3062
Side Beam BracketPage 220
B3080S (Short)B3080L (Long)
Structural Welding LugPage 222
B3083B3083WO
Welded Beam AttachmentPage 221
B3084
Single Lug Concrete PlatePage 225
B3085
Rod Attachment Concrete PlatePage 223
B3086
Clevis Concrete PlatePage 224
B3082
Rod Beam AttachmentPage 226
Threaded Accessories
(Continued)
Pictorial IndexB3220Malleable IronRod CouplingPage 243B655
Steel Rod CouplingPage 242B656Steel Reducer Rod CouplingPage 242B3234Bevel WasherPage 244B3248
Steel Washer PlatePage 244
B200
Square Washer
Page 243 HN - Hex Nut
HHN - Heavy Hex Nut
Page 245FWFlat WasherPage 246ATBToggle BoltPage 247AWAWedge AnchorPage 247FFW
Flat Fender WasherPage 246LWLock WasherPage 246B3210Eye RodPage 239B3211
Welded Eye Rod239
B3210X
Linked Eye RodPage 240
B3211X
Linked Welded Eye RodPage 240
Fig. 98B
Rod Stiffener withBreak Off Bolt Head
Page 237Fig. 98Rod StiffenerPage 237B3214Tie BoltPage 238B3212J-BoltPage 241B3228
Hex Head Lag BoltPage 241DS 16 x 2#16 x 2"Drive ScrewPage 241SC228Rod StiffenerPage 237B3205
Machine Threaded Rod
Page 236 All Threaded RodATRPage 236
B3213
Coach Screw RodPage 238
VIBRA TROL
™
DURA-BLOK
™
Pictorial IndexDBP & DBMBasesPage 274DB Series
Base & Short ChannelPage 275
DB6 Series
Base & Tall Channel
DB10 Series
Double Base & Long ChannelPage 277
SHE
Isolation Spring HangerPages 267 & 268
HSL/HS
Vibration Spring HangerPages 261 & 262RHNeoprene HangerPage 266HESL/HESCombination Spring& NeoprenePages 263 & 264BVTVibraClampTubing SizesPage 269BVPVibraClampPipe SizesPage 270B1999Vibra CushionPage 271ISOISO PipePage 271NNP
Ribbed Neoprene PadPage 251
VRP
Rubber Cube PadPage 252
CNNK
Cork, Ribbed Neopreneand SteelPage 252
CNP
Cork and RibbedNeoprene Pad
Page 251
BVS
Vibra Strip™ for15/8" Wide B-LinechannelPage 253NVDDouble DeflectionPage 253 CM
Metal Housing and NeoprenePage 254HMLT/HMTHoused 1" Deflection MountingPages 259 & 260OML/OMSpring MountPages 255 & 256HMLE/HMEHoused 1" Deflection MountingPages 257 & 258
DURA-BLOK
™
(Continued)
KwikWire
™
Pictorial IndexKwikWire ClampPage 286KwikPak™KitPage 287Wire RopePage 286KwikWire HangerPage 288
Wire Rope Cutter
Page 287KwikWire AccessoriesBKL & BKLKLoop TerminationPage 290KwikWire AccessoriesBKH & BKHKSingle Hook Termination
Page 291
KwikWire Accessories
BKYH & BKYHKDouble Hook Termination
Page 292
KwikWire Accessories
BKA & BKAKAngle Bracket
TerminationPage 293
DBE Series
Base & AdjustableHeight Channel
Page 282
CLDP10
Load Distribution PlatePage 283
DBR Series
Base & Adjustable HeightRoller Assembly
Page 282
DBR Series
Base & Fixed HeightRoller Assembly
Page 281
DB__DS Series
Bases & Harness AssemblyPages 279 & 280
DBM Series
Base & Clamp RiserPage 278
B-Line's metal framing support system is designed with many
time-saving features. Fully adjustable and reusable, with a complete line of
channels, fittings, and accessories for multi-purpose applications.
SELECTION CHART
for Channels, Materials and Hole Patterns
Material & Thickness* Channel Hole Pattern **ChannelStainless SH S H17/8 TH KO6DimensionsSteelB11 31/4" (82.5) 15/8" (41.3) 12 Ga. -- -- -- 1 1 1 -- 1B12 27/16" (61.9) 15/8" (41.3) 12 Ga. .105 -- -- 1 2 1 1 2 -- 1 2
B22 15/8" (41.3) 15/8" (41.3) 12 Ga. .105 12 Ga. 12 Ga. 1 2 3 4 1 1 2 3 4 1 1 2
B24 15/8" (41.3) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1 2 3 4 1 1 2 3 4 -- 1 2
B26 15/8" (41.3) 15/8" (41.3) 16 Ga. -- -- -- 1 1 1 -- 1
B32 13/8" (34.9) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 1 3 1 1 3 -- 1
B42 1" (25.4) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 1 3 1 1 3 -- 1
B52 13/16" (20.6) 15/8" (41.3) 12 Ga. -- -- -- 1 1 1 -- 1
B54 13/16" (20.6) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1 2 3 4 1 1 2 3 4 -- 1 2
B56 13/16" (20.6) 15/8" (41.3) 16 Ga. -- -- -- 1 1 1 -- 1ChannelTypeSteel1Alum.2Type3043Type3164Height WidthChannel Nuts
Size and Part NumberThread With Without Twirl
Size Spring Spring Nut
1/4"-20 N224 N224WO TN2243/8"-16 N228 N228WO TN2281/2"-13 N225 N225WO TN2255/8"-11 N255 N255WO --3/4"-10 N275 N275WO
--Schedule 40 Pipe Clamps
Copper Tubing ClampsDURA-COPPER™
Available Finishes: Electro-Galvanized, Aluminum, Stainless,DURA-COPPER Painted, Hot-Dip Galvanized and PVC coated. Nut and bolts are included with all two-piece clamps.
** Add “PA” to Part No. for Pre-assembledAvailable Finishes: Electro-Galvanized
B2000 Series
Part Nominal Mat'lNo. Tubing Size Ga.
B2026DCU 1/2" (15) 16B2008DCU 3/4" (20) 16B2030DCU 1" (25) 14B2032DCU 11/4" (32) 14B2011DCU 11/2" (40) 14B2038DCU 2" (50) 12B2042DCU 21/2" (60) 12B2046DCU 3" (80) 12B2050DCU 31/2" (90) 12B2054DCU 4" (100) 11
Part Nomina l Mat'lNo. Pipe Size Ga.
B2001 3/8" (10) 16B2008 1/2" (15) 16B2009 3/4" (20) 14B2010 1" (25) 14B2011 11/4" (32) 14B2012 11/2" (40) 12B2013 2" (50) 12B2014 21/2" (60) 12B2015 3" (80) 12B2016 31/2" (90) 11B2017 4" (100) 11B2018 41/2" (115) 11B2019 5" (125) 11B2020 6" (150) 11B2021 7" (175) 11B2022 8" (200) 11Strut SystemsInformation
Combo Nut WashersPart Thread
Number Size
NW524 1/4"-20
NW528 3/8"-16
NW525 1/2"-13
Below are some basic clamp and cushions to be used with a strut system. For the industry's most complete
line of strut and strut fittings, refer to B-Line's Strut Systems Engineering Catalog.
O.D. Pipe Clamps
For Rigid Conduit or Iron PipeB1999Vibra-Cushion™
• Inhibits Galvanic Reaction
• Reduces Sound & Vibration
• Used on refrigeration, HVAC, copper
tubing, glass pipes & hydraulic lines
Available in 20 Ft. rolls.
B-LINEB-LINEBVP150BVP1501 1/2” I.P11/2”I.P..BVT & BVPSeriesVibra-Clamp™
Available for tubing and pipe sizes
1
/
4
" to 6", OD sizes
1
/
4
" to 6
5
/
8
".
Easy one tool installation, dampens
vibration and noise, secures tubing
firmly, and protects against galvanic
reaction.
Stainless Steel available
Part O.D. Size Mat'lNo. (Outside Dia.) Ga.
B2023 1/4" (6.3) 16B2024 3/8" (9.5) 16B2025 1/2" (12.7) 16B2026 5/8" (15.9) 16B2027 3/4" (19.0) 16B2028 7/8" (22.2) 16B2029 1" (25.4) 14B2030 11/8" (28.6) 14B2031 11/4" (31.7) 14B2032 13/8" (34.9) 14B2004 11/2" (38.1) 14B2011 15/8" (41.3) 14B2005 13/4" (44.4) 12B2036 17/8" (47.6) 12B2037 2" (50.8) 12B2038 21/8" (54.0) 12B2039 21/4" (57.1) 12B2013 23/8" (60.3) 12B2041 21/2" (63.5) 12B2042 25/8" (66.7) 12B2043 23/4" (69.8) 12B2014 27/8" (73.0) 12B2045 3" (76.2) 12B2046 31/8" (79.4) 12B2047 31/4" (82.5) 12B2048 33/8" (85.7) 12B2015 31/2" (88.9) 12B2050 35/8" (92.1) 11B2051 33/4" (95.2) 11B2016 4" (101.6) 11B2054 41/8" (104.8) 11B2055 41/4" (107.9) 11B2056 43/8" (111.1) 11B2017 41/2" (114.3) 11B2058 45/8" (117.5) 11B2059 43/4" (120.6) 11B2060 47/8" (123.8) 11B2061 5" (127.0) 11B2062 51/8" (130.2) 11B2063 51/4" (133.3) 11B2064 53/8" (136.5) 11B2065 51/2" (139.7) 11
Nominal Length of UseSize Vibra-Cushion Clamp No.
3/8" (10) 21/8" (54.0) B20021/2" (15) 25/8" (66.7) B20093/4" (20) 31/4" (82.5) B20311" (25) 41/8" (104.8) B200411/4" (32) 53/16" (131.8) B201211/2" (40) 515/16" (150.8) B20382" (50) 71/2" (190.5) B204221/2" (65) 9" (228.6) B20463" (80) 11" (279.4) B205131/2" (90) 121/2" (317.5) B20554" (100) 141/2" (368.3) B20595" (125) 177/16" (442.9) B20676" (150) 203/4" (527.0) B2116
For Thinwall (EMT) ConduitNominal Length of Use
Size Vibra-Cushion Clamp No.
3/8" (10) 113/16" (46.0) B20271/2" (15) 23/16" (58.7) B20023/4" (20) 27/8" (73.0) B20031" (25) 35/8" (92.1) B203211/4" (32) 43/8" (120.6) B203611/2" (40) 57/16" (138.1) B20122" (50) 67/8" (174.6) B2013
For Copper Tubing Type L & KNominal Length of Use
Size Vibra-Cushion Clamp No.
1/4" (6) 13/16" (30.2) B20263/8" (10) 19/16" (39.7) B20271/2" (15) 17/8" (47.6) B20285/8" (17) 25/16" (58.7) B20293/4" (20) 23/4" (69.8) B20301" (25) 31/2" (88.9) B203211/4" (32) 45/16" (109.5) B201111/2" (40) 51/8" (130.2) B20362" (50) 611/16" (169.9) B201321/2" (65) 81/4" (209.5) B20143" (80) 913/16" (249.2) B204831/2" (90) 113/8" (288.9) B20524" (100) 1215/16" (328.6) B20565" (125) 61/8" (409.6) B20646" (150) 191/4" (488.9) B21128" (200) 251/2" (647.7) B2128
For Copper Tubing & OD Sizes
For Pipe Sizes
Catalog Copper & Steel NominalNo. OD Tubing Size Copper Size
BVT025 1/4" (6.3) -- --BVT037 3/8" (9.5) 1/4" (6)BVT050 1/2" (12.7) 3/8" (10)BVT062 5/8" (15.9) 1/2" (15)BVT075 3/4" (19.0) 5/8" (17)BVT087 7/8" (22.2) 3/4" (20)BVT100 1" (25.4) -- --BVT112 11/8" (28.6) 1" (25)BVT125 11/4" (31.7) -- --BVT137 13/8" (34.9) 11/4" (32)BVT150 11/2" (38.1) -- --BVT162 15/8" (41.3) 11/2" (40)BVT175 13/4" (44.4) -- --BVT187 17/8" (47.6) -- --BVT200 2" (50.8) -- --BVT212 21/8" (54.0) 2" (50)BVT225 21/4" (57.1) -- --BVT250 21/2" (63.5) -- --BVT262 25/8" (66.7) 21/2" (65)BVT300 3" (76.2) -- --BVT312 31/8" (79.4) 3" (80)BVT362 35/8" (92.1) 31/2" (90)BVT400 4" (101.6) -- --BVT412 41/8" (104.8) 4" (100)BVT612 61/8" (155.6) 6" (150)Catalog NominalNo. Pipe Size
BVP025 1/4" (6)BVP037 3/8" (10)BVP050 1/2" (15)BVP075 3/4" (20)BVP100 1" (25)BVP125 11/4" (32)BVP150 11/2" (40)BVP200 2" (50)BVP250 21/2" (65)BVP300 3" (80)BVP350 31/2" (90)BVP400 4" (100)BVP500 5" (125)BVP600 6" (150)B2000 SeriesStrut SystemsInformation
MATERIALS
Carbon Steel
Carbon steel is used in the
manufacture of B-Line pipe hangersand supports. Excellent strengthcharacteristics and adaptability tocold forming provide a well
engineered design. By cold formingthe steel, mechanical properties areincreased, adding to the structuralintegrity of the fabricated hanger.
Stainless Steel
AISI Type 304 and Type 316 arenon-magnetic members of theaustenitic stainless steel group.Several conditions make the use ofstainless steel ideal. These includereducing long term maintenancecosts, high ambient temperatures,appearance, and stable structuralproperties such as yield strength,and high creep resistance.
CORROSION
All metal surfaces exposed to theenvironment are affected by
corrosion. Depending on the physicalproperties of the metal and itsproximity to other dissimilar metals,an electrochemical reaction mayoccur which causes an attack on themetal itself, resulting in corrosion.Chemical corrosion is limited tohighly corrosive environments, hightemperatures, or a combination ofboth.
FINISHES
Zinc Coatings
Protective zinc coatings are availableon a number of pipe hangers andaccessories in three basic forms:
but is suitable for extended exposure indry or mildly corrosive atmospheres.
Hot-Dip Galvanized After
Fabrication (ASTM A123)
After a pipe hanger or fitting has beenfabricated, it is completely immersed ina bath of molten zinc. A metallurgicalbond is formed, resulting in a zinccoating that completely coats allsurfaces, including edges. Zinccoatings of this specification have aminimum thickness of 1.50 ounces persquare foot (0.45 kg/m2) on each side
or a total of 3.0 ounces per square foot(0.9 kg/m2) of steel.
Hot-dip galvanized after fabrication isrecommended for outdoor exposure.For best results, a zinc rich paint(available from B-Line) should beapplied to field cuts. The zinc rich paintwill provide immediate protection forfield cuts and eliminate the short timeperiod for galvanic action to "heal" thedamaged coating.
Plastic Coating
Some products offered by B-Line areplastic or vinyl coated for prevention ofgalvanic reaction between materials orfor noise reduction. These coatedproducts can also be used wherecontact between glass pipe and hangeris not desirable. Felt lined hangers maybe substituted for same purpose.
Red Primer
A corrosion resistant metal primercontaining rust inhibitive pigments.Electro-galvanized, pre-galvanized, and
hot-dip galvanized after fabrication. Inall cases, the zinc protects the steelfirst as a sacrificial anode to repair bareareas on cut edges and gouges.When exposed to air and moisture,zinc forms a tough, adherent protectivefilm consisting of a mixture of zincoxides, hydroxides, and carbonates.The corrosion resistance of zinc isdirectly related to its thickness and theenvironment. For example a 0.2 mil(5 μm) coating will last twice as long asa 0.1 mil (2.5 μm) coating in the sameenvironment.
Electro-Galvanized
(ASTM B633 SC1 or SC3)
An electro-galvanized process depositsa coating of zinc on the steel byelectrolysis from a bath of zinc salts.This coating is pure zinc and adheresto the steel with a molecular bond. Amaximum of 0.5 mils (12.7 μm) of zinccan be applied by this method. Thiscoating is recommended for in-dooruse in relatively dry areas.
Pre-Galvanized Zinc
(ASTM A653 Coating
Designation G90)
Pre-galvanized zinc is produced bycontinuously rolling the steel coils orsheets through molten zinc at the steelmills. This is also known as "mill-galvanized" or "hot-dipped mill galva-nized". Coils are then slit to size forfabrication of pipe hangers. Coatingthicknesses of G90, is 0.90 ounces persquare foot (0.27 kg/m2) of steel
surface.
Cut edges and welded areas are not zinc coated; however, zinc near theuncoated metal becomes a
sacrificial anode which protects thebare areas after a short period of time.Pre-galvanized steel is not
generally recommended for use outdoors in industrial environments,
Protection of cut edges with zinc coatings.ZnFeZnFeZnOTechnical Data
General Information
Torque
The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or
torque wrench reading and the actual tension created in the bolt may be substantially different. Important factors
affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque
wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%.
Charts and Tables
Charts and tables in this section are compiled from information published by nationally recognized organizations
and are intended for use as a guide only. B-Line recommends that users of this information determine the validity
of such information as applied to their own applications.
Eaton’s B-Line reserves the right to make specification changes without notice.
DURA-COPPER
™
& DURA-GREEN
™
EPOXY COATING PROCESS
SALT SPRAY TEST RESULTS
(1) All salt spray (fog) tests conducted in accordance with ASTM B117-73 and evaluated and rated
according to ASTM D1654-79 Tables 1 & 2. Tests were performed and certified by an independent testing laboratory.
DURA-COPPER
™
and
DURA-GREEN
™
Epoxy Coatings
DURA-COPPER and DURA-GREENare water borne epoxy coatingsapplied to B-Line products by aprecisely controlled cathodic electro-deposition process. This process isaccomplished using a conveyor totransport parts through several
cleaning, phosphatizing and applicationstages prior to being baked (Seediagram below).
This custom designed paint system isused for painting all copper paintedhanger parts and all green channel,slotted angle and fittings.
Samples are selected on a routinebasis for Salt Spray (fog) testing toverify the quality of the finish. Thesetests are performed in accordance withASTM B117-73 and evaluated andrated according to ASTM D1654-79(Tables 1 & 2). The DURA-COPPERand DURA-GREEN Epoxy coatingshave been tested and listed byUnderwriters Laboratories inaccordance with "Standard for PipeHanger Equipment for Fire ProtectionService, UL 203" and meet or exceedall requirements of Federal
Specification TT-C-490B Paragraph 3.
Quality Assurance
B-Line’s Quality Assurance Programhas been developed and implementedfor compliance to various industrystandards and specifications.
DURA-COPPEREpoxyCopper PlatingElapsed TimeTANK 1Parts arethoroughlycleaned andphosphatized.TANK 2Rinse isapplied toremoveinsoluble saltsand unreactedphosphates.TANK 3Phosphatizedsealer is appliedto insurecorrosion resis-tance and paintadhesion.TANK 4The materialmoves throughclear waterrinse to removeexcess phos-phates.TANK 5Deionized rinseprepares themetal for thecathodicelectro-coating.TANK 6The electro-coating tankapplies a uniform coat ofepoxy paint tothe entiresurface.TANK 7The first post rinseremoves anyunelectricallyattractedsolids.TANK 8The final rinseinsures asmooth, nonblemish finish.BAKE OVENThe curingprocess takes20 minutes at abaking temperature of375°F (199°C).
DURA-COPPER
out performs
Copper Plating
4 to 1
Technical Data
Part I - GENERAL
1.01 SECTION INCLUDES
A. The work covered under this section consists of the furnishing of all necessary labor,supervision, materials, equipment, and services to completely execute the pipe hanger and supports as described in this specification.
1.02 REFERENCES
A. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel.
B. ASTM A123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.C. ASTM A653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process.
D. ASTM A1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability.E. ANSI/MSS SP58 Manufacturers Standardization Society: Pipe Hangers and Supports
-Materials, Design, and Manufacture.
F. ANSI/MSS SP69 Manufacturers Standardization Society: Pipe Hangers and Supports -Selection and Application.
G. NFPA 13 - Installation of Sprinkler Systems.
1.03 QUALITY ASSURANCE
A. Hangers and supports used in fire protection piping systems shall be listed and labeled byUnderwriters Laboratories.
B. Steel pipe hangers and supports shall have the manufacturers name, part number, andapplicable size stamped in the part itself for identification.
C. Hangers and supports shall be designed and manufactured in conformance withANSI/MSS SP-58.
D. Supports for sprinkler piping shall be in conformance with NFPA 13.
1.04 SUBMITTALS
A. Submit product data on all hanger and support devices, including shields and attachmentmethods. Product data to include, but not limited to materials, finishes, approvals, loadratings, and dimensional information.
Part II - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Manufacturer: Subject to compliance with these specifications, pipe hanger and supportsystems shall be as manufactured by B-Line, Inc.
2.02 PIPE HANGERS AND SUPPORTS
A. Hangers
1. Uninsulated pipes 2 inch and smaller:
a. Adjustable steel swivel ring (band type) hanger, B-Line Fig. 200.b. Adjustable steel swivel J-hanger, B-Line B3690.
c. Malleable iron ring hanger, B-Line B3198R or hinged ring hanger,B3198H.
d. Adjustable steel clevis hanger, B-Line B3104 or B3100.
SECTION 15140 - PIPE HANGERS AND SUPPORTS
Technical Data
2. Uninsulated pipes 21/2inch and larger:
a. Adjustable steel clevis hanger, B-Line B3100.b. Pipe roll with sockets, B-Line B3114.
c. Adjustable steel yoke pipe roll, B-Line B3110.3. Insulated pipe - Hot or steam piping:
a. 2 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metalshield, B-Line B3100 with B3151 or B3153 series.
b. 21/2inch and larger pipes:
i. Adjustable steel yoke pipe roll with pipe covering protection saddle, B-Line B3110 with B3160 - B3165 series.
ii. Pipe roll with sockets with pipe covering protection saddle, B-LineB3114 with B3160 - B3165 series.
4. Insulated pipe - Cold or chilled water piping:
a. 5 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metalshield, B-Line B3100 with B3151 or B3153 series.
b. 6 inch and larger pipes:
i. Adjustable steel yoke pipe, B-Line B3110, with B3380CW - B3384CWcalcium silicate shield.
ii. Pipe roll with sockets, B-Line B3114, with B3380CW - B3384CW calcium silicate shield.
B. PIPE CLAMPS
1. When flexibility in the hanger assembly is required due to horizontal movement, usepipe clamps with weldless eye nuts, B-Line B3140 or B3142 with B3200. For insulatedlines use double bolted pipe clamps, B-Line B3144 or B3146 with B3200.
C. MULTIPLE OR TRAPEZE HANGERS
1. Trapeze hangers shall be constructed from 12 gauge roll formed ASTM A1011 SS Gr. 33structural steel channel, 15/8” x 15/8” minimum, B-Line B22 strut or stronger as
required.
2. Mount pipes to trapeze with two piece pipe straps sized for outside diameter of pipe,B-Line B2000 series.
3. For pipes subjected to axial movement:
a. Strut mounted roller support, B-Line B3126. Use pipe protection shield or saddles on insulated lines.
b. Strut mounted pipe guide, B-Line B2417.D. WALL SUPPORTS
1. Pipes 4 inch and smaller:
a. Carbon steel hook, B-Line B3191.b. Carbon steel J-hanger, B-Line B3690.2. Pipes larger than 4 inch:
a. Welded strut bracket and pipe straps, B-Line B3064 and B2000 series.b. Welded steel brackets, B-Line B3066 or B3067, with roller chair or adjustable
steel yoke pipe roll. B-Line B3120 or B3110. Use pipe protection shield orsaddles on insulated lines.
Technical Data
E. FLOOR SUPPORTS
1. Hot piping under 6 inch and all cold piping:
a. Carbon steel adjustable pipe saddle and nipple attached to steel base stand sizedfor pipe elevation, B-Line B3093 and B3088T or B3090 and B3088. Pipe saddleshall be screwed or welded to appropriate base stand.
2. Hot piping 6 inch and larger:
a. (Adjustable) Roller stand with base plate, B-Line B3117SL (or B3118SL).b. Adjustable roller support and steel support sized for elevation, B-Line B3124F. VERTICAL SUPPORTS
1. Steel riser clamp sized to fit outside diameter of pipe, B-Line B3373.G. COPPER TUBING SUPPORTS
1. Hangers shall be sized to fit copper tubing outside diameters.a. Adjustable steel swivel ring (band type) hanger, B-Line B3170CT.
b. Malleable iron ring hanger, B-Line B3198CT or hinged ring hanger B3198HCT.c. Adjustable steel clevis hanger, B-Line B3104CT.
H. PLASTIC PIPE SUPPORTS
1. V-bottom clevis hanger with galvanized 18 gauge continuous support channel,
B-Line B3106 and B3106V, to form a continuous support system for plastic pipe or flexibletubing.
I. SUPPLEMENTARY STRUCTURAL SUPPORTS
1. Design and fabricate supports using structural quality steel bolted framing materialsas manufactured by B-Line. Channels shall be roll formed, 12 gauge ASTM
A1011 SS Grade 33 steel, 15/8” x 15/8” or greater as required by loading conditions.
Submit designs for pipe tunnels, pipe galleries, etc., to engineer for approval. Useclamps and fittings designed for use with the strut system.
2.04 UPPER ATTACHMENTS
A. BEAM CLAMPS
1. Beam clamps shall be used where piping is to be suspended from building steel.
Clamp type shall be selected on the basis of load to be supported, and load configuration.2. C-Clamps shall have locknuts and cup point set screws, B-Line B351L, B3036L or Fig.
65XT Top flange C-clamps shall be used when attaching a hanger rod to the top flange of structural shapes, B-Line B3034 or B3033. Refer to manufacturers’ recommendationfor setscrew torque. Retaining straps shall be used to maintain the clamp’s positionon the beam where required (Fig. 69, Fig. 69R).
3. Center loaded beam clamps shall be used where specified. Steel clamps shall be B-Line B3050 or B3055. Malleable iron or forged steel beam clamps with cross bolt shallbe B-Line B3054 or B3291 - B3297 series as required to fit beams.
B. CONCRETE INSERTS
1. Cast in place spot concrete inserts shall be used where applicable, either steel ormalleable iron body, B-Line B2500 or B3014. Spot inserts shall allow for lateraladjustment and have means for attachment to forms. Select insert nuts to suit threaded hanger rod sizes, B-Line N2500 or B3014N series.
Technical Data
2. Continuous concrete inserts shall be used where applicable. Channels shall be 12gauge, ASTM A 1011 SS Grade 33 structural quality carbon steel, complete withstyrofoam inserts and end caps with nail holes for attachment to forms. Thecontinuous concrete insert shall have a load rating of 2,000 lbs/ft. in concrete, B-Line B22I, B32I, or B52I (B52I is limited to 1,500 lbs/ft.). Select channel nutssuitable for strut and rod sizes.
2.05 VIBRATION ISOLATION AND SUPPORTS
A. For refrigeration, air conditioning, hydraulic, pneumatic, and other vibrating systemapplications, use a clamp that has a vibration dampening insert and a nylon insertedlocknut. For copper and steel tubing use B-Line BVT series VibraClamps, for pipesizes use BVP series.
B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers as required.
C. For base mounted equipment use vibration pads, molded neoprene mounts, or springmounts as required.
D. Vibration isolation products as manufactured by B-Line, VibraTrol systems.
2.06 ACCESSORIES
A. Hanger rods shall be threaded both ends, B-Line B3205, or continuous threaded rodsof circular cross section. Use adjusting locknuts at upper attachments and hangers. No wire, chain, or perforated straps are allowed.
B. Shields shall be 180° galvanized sheet metal, 12 inch minimum length, 18 gauge minimumthickness, designed to match outside diameter of the insulated pipe, B-Line B3151.C. Pipe protection saddles shall be formed from carbon steel, 1/8inch minimum thickness,
sized for insulation thickness. Saddles for pipe sizes greater than 12 inch shall have a center support rib.
2.07 FINISHES
INDOOR FINISHES
A. Hangers and clamps for support of bare copper piping shall be coated with copper coloredepoxy paint, B-Line DURA-COPPER™. Additionally a plastic coating or a felt lining in
hanger can be used.
B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTMB633 - SC3 or shall have an electro-deposited green epoxy finish, B-Line DURA-GREEN™.
C. Strut channels shall be pre-galvanized in accordance with ASTM A653 G90 or havean electro-deposited green epoxy finish, B-Line DURA-GREEN.
OUTDOOR AND CORROSIVE AREA FINISHES
D. Hangers and strut located outdoors shall be hot dip galvanized after fabrication inaccordance with ASTM A123. All hanger hardware shall be hot-dip galvanized orstainless steel. Zinc plated hardware is not acceptable for outdoor or corrosive use.E. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel
with stainless steel hardware.
Technical Data
Part III - EXECUTION
3.01 PIPE HANGERS AND SUPPORTS
A. Pipe shall be adequately supported by pipe hanger and supports specified in PART II -PRODUCTS. Hangers for insulated pipes shall be sized to accommodate insulationthickness.
B. Horizontal steel piping shall be supported in accordance with ANSI/MSS SP-69 & SP-58Tables 3 and 4, excerpts of which follow below:
NOMINAL PIPE SIZE ROD DIAMETER MAXIMUM SPACING
3/8” - 11/4” 3/8” 7’-0”11/2” 3/8” 9’-0”2” 3/8” 10’-0”21/2” 1/2” 11’-0”3” 1/2” 12’-0”31/2” 1/2” 13’-0”4” 5/8” 14’-0”5” 5/8” 16’-0”6” 3/4” 17’-0”8” 3/4” 19’-0”10” 7/8” 22’-0”12” 7/8” 23’-0”14” 1” 25’-0”16” 1” 27’-0”
C. Horizontal copper tubing shall be supported in accordance with ANSI/MSS SP-69 & SP-58Tables 3 and 4, excerpts of which follow below:
NOMINAL TUBING SIZE ROD DIAMETER MAXIMUM SPACING
1/4” - 3/4” 3/8” 5’-0”1” 3/8” 6’-0”11/4” 3/8” 7’-0”11/2” 3/8” 8’-0”2” 3/8” 8’-0”21/2” 1/2” 9’-0”3” 1/2” 10’-0”31/2” 1/2” 11’-0”4” 1/2” 12’-0”5” 1/2” 13’-0”6” 5/8” 14’-0”8” 3/4” 16’-0”
D. Provide means of preventing dissimilar metal contact such as plastic coated hangers, copper colored B-Line DURA-COPPER™epoxy paint, or non-adhesive isolation tape
(B-Line Iso-Pipe™). Galvanized felt isolators sized for copper tubing may also be used,
B-Line B3195CT.Technical Data
E. Support horizontal cast iron pipe adjacent to each hub, with 10 feet maximum spacing between hangers.
F. Install hangers to provide a minimum of 1/2inch space between finished covering and
adjacent work.
G. Place a hanger within 12 inches of each horizontal elbow.
H. Support vertical piping independently of connected horizontal piping. Support verticalpipes at every (other) floor. Wherever possible, locate riser clamps directly below pipecouplings or shear lugs.
I. Where several pipes can be installed in parallel and at the same elevation, provide trapezehangers as specified in Section 2.02 C. Trapeze hangers shall be spaced according to thesmallest pipe size, or install intermediate supports according to schedule in Section 3.01 B.J. Do not support piping from other pipes, ductwork or other equipment which is not
building structure.
3.02 CONCRETE INSERTS
A. Provide inserts for placement in formwork before concrete is poured.
B. Provide inserts for suspending hangers from reinforced concrete slabs and sides ofreinforced concrete beams.
C. Where concrete slabs form finished ceilings, provide inserts to be flush with slab surface.D. For inserts carrying 5” nominal pipe and larger, provide hooked rod to concrete
reinforcement.Technical Data
Beam clamps offered in this section are designed to provide attachment of hanger rods to structural members withoutdrilling or welding. A wide range of types and sizes are available for various applications.
Materials
Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainlesssteel and other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Electro-Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating andDURA-GREEN™. Other special coatings are available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may
or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, thehardware may be supplied Electro-Plated, copper plated, or in stainless steel.
Recommended Set screw Torque (unless otherwise specified)
1/4”-20 3/8”-16 1/2”-13 5/8”-11 3/4”-10
4 ft/lbs (5 Nm) 5 ft/lbs (7 Nm) 11 ft/lbs (15 Nm) 21 ft/lbs (28 Nm) 34 ft/lbs (46 Nm)Over torqued set screws will damage beam clamps in this section.
We are aware that torque wrenches are not used or not available in many instances. In the absence of a torque wrench, theset screw should be finger tightened to the I-beam and then an additional 1/4to 1/2turn applied to the set screw.
Approvals
(as noted)
Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
Beam Clamps